This M11x46mm Brass Hex Head Cap Screw offers excellent corrosion resistance and non-magnetic properties. Its robust design ensures secure and reliable fastening in a wide range of industrial and decorative applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M11 |
| Length | 46mm |
| Head Width | 24mm |
Engineered for reliability and performance, this M11x46mm Brass Hex Head Cap Screw is manufactured from high-quality brass, offering exceptional corrosion resistance and good electrical conductivity. The M11 nominal diameter and 46mm length provide substantial fastening capability, while the 24mm head width ensures ample surface area for tool engagement and load distribution. Brass's inherent non-magnetic properties make it suitable for applications where magnetic interference must be avoided. Its moderate tensile strength makes it ideal for medium-duty fastening requirements where environmental factors are a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the cap screw into the receiving component to verify alignment. 3. Tighten the cap screw to the recommended torque using an appropriate wrench, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread stripping or screw breakage. | Consult a torque chart for the specific application and material to determine the correct tightening torque. Use a calibrated torque wrench. |
| Cross-threading the screw, damaging both the screw and the receiving threads. | Always start by hand-threading the screw to ensure it engages properly before using a tool. If resistance is met, back out and re-align. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and grounding, Decorative architectural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||