Engineered from aerospace-grade Titanium Grade 5, this M11x38mm hex head cap screw delivers exceptional strength-to-weight ratio and superior corrosion resistance for critical industrial applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M11 |
| Length | 38mm |
| Head Width | 32mm |
Designed for demanding industrial environments, this M11x38mm hex head cap screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent tensile strength, fatigue resistance, and unparalleled corrosion immunity in aggressive media. The M11 diameter and 38mm length, combined with a substantial 32mm hex head width, ensure robust load-bearing capacity and secure torque application. This fastener is ideal for aerospace, marine, chemical processing, and high-performance automotive sectors where material integrity and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant if specified for the application. 3. Tighten screw to the recommended torque specification using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, stripping threads or damaging the screw head. | Always adhere to manufacturer-specified torque values for Titanium Grade 5 fasteners. Use a calibrated torque wrench. |
| Using incompatible materials in the mating threads, leading to galvanic corrosion. | Ensure mating components are of compatible materials to prevent galvanic corrosion. Consult material compatibility charts for Titanium Grade 5. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and systems, Chemical processing equipment, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||