Engineered for superior performance, this M11x35mm Hex Head Cap Screw is crafted from Grade 5 Titanium. Offering exceptional strength-to-weight ratio and corrosion resistance, it's the ideal fastener for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M11 |
| Length | 35mm |
| Head Width | 12mm |
A proven choice for industrial professionals, this M11x35mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent biocompatibility, high tensile strength (up to 130,000 psi), and superior corrosion resistance in aggressive environments. The M11 nominal diameter and 35mm length provide robust fastening capabilities, while the 12mm hexagonal head ensures secure engagement with standard tools. This material's low density (approximately 4.43 g/cm³) makes it ideal for weight-sensitive applications without compromising structural integrity. Applications range from aerospace and marine components to medical implants and high-performance automotive assemblies where reliability under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the cap screw to confirm alignment and prevent cross-threading. 3. Tighten the cap screw using a calibrated torque wrench to the manufacturer's recommended specification for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the cap screw, which can lead to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to the specified torque values. |
| Using standard steel tools which can damage the softer titanium threads. | Utilize tools made of hardened steel or carbide to prevent galling and ensure proper engagement. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine hardware and fittings, High-performance automotive assemblies, Medical implants and surgical instruments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||