Engineered for superior performance, this M11x33mm Hex Head Cap Screw is manufactured from robust 304 stainless steel. It offers exceptional corrosion resistance and durability for critical fastening applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Size | M11 |
| Length | 33mm |
| Head Width | 36mm |
A proven choice for industrial professionals, this M11x33mm Hex Head Cap Screw boasts a 36mm head width, providing ample torque application. Constructed from premium 304 stainless steel, it exhibits excellent tensile strength and resistance to a wide range of corrosive agents, making it suitable for marine, chemical processing, and food service environments. Its precise threading ensures secure and reliable connections in dynamic load conditions, minimizing the risk of loosening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket size for the 36mm hex head. 2. Insert the screw into the pre-tapped hole or through the assembly. 3. Tighten the screw to the recommended torque specification for the M11 thread size, ensuring a secure joint.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to stripped head corners. | Always use a correctly sized, high-quality socket or wrench to engage all flats of the hex head. |
| Over-tightening, causing thread damage or fastener failure. | Adhere to established torque charts for M11 fasteners in the specific material being joined. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural steel connections, Machinery assembly and repair, Marine and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||