This M11x26mm brass hex head cap screw offers superior corrosion resistance and excellent conductivity. Engineered for reliable fastening in diverse industrial environments, ensuring secure connections.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Size | M11 |
| Length | 26mm |
| Head Width | 12mm |
Manufactured under strict quality controls, this M11x26mm brass hex head cap screw features a nominal diameter of M11 and a length of 26mm, with a head width of 12mm. Crafted from high-grade brass (typically UNS C36000 or equivalent), it exhibits excellent machinability, non-magnetic properties, and inherent resistance to corrosion in various atmospheric and chemical conditions. This makes it ideal for electrical applications, marine environments, and where non-sparking properties are beneficial. Conforms to relevant ISO or ANSI standards for dimensional accuracy and material integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Apply a light coating of lubricant if required by the application to prevent galling, especially in brass-on-brass applications. 3. Tighten the screw to the recommended torque specification using an appropriate wrench or socket, ensuring even pressure and avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using brass screws in high-stress applications requiring significant tensile strength. | Select appropriate steel alloys (e.g., Grade 8.8, 10.9) for high-stress applications; brass is suited for moderate loads and corrosion resistance. |
| Overtightening brass screws, leading to thread stripping or deformation. | Adhere to torque specifications and use a torque wrench. Brass is softer than steel and more susceptible to damage from excessive force. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Electrical connectors and busbars, Marine hardware and fittings, Instrumentation and control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||