Engineered for demanding environments, this M11x22mm hex head cap screw is crafted from aerospace-grade Titanium Grade 5. It offers superior strength, corrosion resistance, and biocompatibility for critical assembly.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M11 |
| Length | 22mm |
| Head Width | 31mm |
Specified by design engineers worldwide, this M11x22mm hex head cap screw features a nominal diameter of M11 and a length of 22mm. The head exhibits a substantial 31mm width for robust torque application. Manufactured from Titanium Grade 5 (Ti-6Al-4V), it delivers an outstanding strength-to-weight ratio, exceptional corrosion resistance in aggressive media, and excellent fatigue strength. These properties make it the material of choice for applications requiring high performance and reliability under extreme conditions, including aerospace structures, medical implants, and marine hardware.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating thread is clean and free of debris. 2. Apply a suitable thread lubricant or anti-seize compound if recommended for the application. 3. Tighten the hex head cap screw to the specified torque using a calibrated torque wrench. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tools which can gall titanium. | Utilize specialized tooling designed for titanium fasteners, such as those with a polished finish or specific flute geometry. |
| Over-torquing the fastener, leading to thread stripping or material deformation. | Always adhere to the manufacturer's or design engineer's specified torque values, using a calibrated torque wrench. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||