Engineered for corrosive and electrically sensitive environments, this M11x148mm Nylon Hex Head Cap Screw offers superior chemical resistance and dielectric properties. Its robust design ensures reliable fastening in challenging industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M11 |
| Length | 148mm |
| Head Width | 15mm |
Designed for demanding industrial environments, this M11x148mm Hex Head Cap Screw is manufactured from high-performance nylon. This material provides excellent resistance to a wide range of chemicals, including solvents and acids, making it ideal for wet or corrosive conditions. With a head width of 15mm, it offers sufficient surface area for torque application without over-stressing the material. The inherent non-conductive nature of nylon makes this fastener suitable for applications where electrical insulation is critical, preventing short circuits and ensuring personnel safety. Its lightweight construction also contributes to reduced overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-tighten the cap screw to start the engagement. 3. Use an appropriate wrench or socket to achieve the specified torque, avoiding over-tightening which can strip nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or material deformation. | Use a torque wrench set to the manufacturer's recommended specification for nylon fasteners, or hand-tighten with moderate pressure. |
| Using the nylon screw in applications exceeding its temperature or load-bearing limits. | Consult the nylon material's datasheet for specific temperature ranges and tensile strength, and select an appropriate fastener for the application's demands. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment assembly, Electrical enclosures and control panels, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||