Engineered for demanding applications, this M11x125mm hex head cap screw offers superior corrosion resistance and impact strength. Its polycarbonate construction ensures lightweight, non-conductive performance in corrosive or sensitive environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Size | M11 |
| Length | 125mm |
| Head Width | 31mm |
Manufactured under strict quality controls, this M11x125mm hex head cap screw features a robust polycarbonate construction. The material provides excellent chemical resistance, high impact strength, and is non-magnetic and non-conductive, making it ideal for environments where metal fasteners are unsuitable due to galvanic corrosion or electrical interference. The head width of 31mm ensures adequate bearing surface for secure fastening. This component meets stringent industrial standards for performance and reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a pre-drilled and tapped hole or nut. 2. Insert the M11x125mm polycarbonate hex head cap screw into the assembly. 3. Tighten using a suitable hex driver or wrench to the recommended torque specification, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to thread stripping or head deformation. | Utilize a torque wrench and adhere to the manufacturer's recommended torque values for polycarbonate fasteners. |
| Using in applications exceeding the temperature or chemical resistance limits of polycarbonate. | Consult material compatibility charts and verify operating temperature ranges before installation. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Medical equipment assemblies, Chemical processing equipment, Marine and offshore applications, Electronics and semiconductor manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||