This M11x124mm Hex Head Cap Screw, forged from Aerospace-grade Titanium Grade 5, offers exceptional corrosion resistance and a superior strength-to-weight ratio, making it ideal for critical applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M11 |
| Length | 124mm |
| Head Width | 21mm |
Specified by design engineers worldwide, this M11x124mm Hex Head Cap Screw is precision manufactured from Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its excellent corrosion resistance, high tensile strength, and superior toughness. With a nominal diameter of M11, a length of 124mm, and a head width of 21mm, it meets stringent aerospace, medical, and high-performance industrial requirements. This material ensures performance in extreme environments where traditional fasteners would fail due to oxidation or fatigue. Its biocompatibility also makes it suitable for implantable devices.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Apply appropriate lubricant if specified for the application. 3. Tighten the cap screw to the manufacturer's recommended torque value using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the titanium fastener. | Always use a calibrated torque wrench and adhere to specified torque values to prevent thread damage or material fatigue. |
| Using incompatible lubricants or anti-seize compounds. | Consult material compatibility charts to ensure lubricants do not degrade titanium or interfere with the fastening integrity. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||