This M11x124mm Nylon Hex Head Cap Screw offers superior corrosion resistance and lightweight construction. Ideal for applications requiring non-conductive or chemically inert fastening solutions.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M11 |
| Length | 124mm |
| Head Width | 13mm |
Built to exacting engineering tolerances, this M11x124mm Nylon Hex Head Cap Screw features a 13mm head width for secure torque application. Constructed from high-performance nylon, it provides excellent dielectric strength, chemical resistance, and a lightweight alternative to metal fasteners. The material's inherent flexibility can also absorb vibration and reduce stress. This makes it suitable for electrical insulation, chemical processing equipment, and environments where corrosion is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Thread the M11x124mm Nylon Hex Head Cap Screw by hand to prevent cross-threading. 3. Tighten using an appropriate wrench or socket, applying torque within the material's recommended limits to avoid stripping or deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Utilize a torque wrench and adhere to recommended torque specifications for nylon fasteners. Hand-tightening followed by a partial turn is often sufficient. |
| Using the wrong tool size, potentially damaging the hex head. | Employ a correctly sized socket or wrench (13mm) that fits snugly onto the hex head to ensure proper engagement and prevent cam-out. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and grounding components, Chemical processing and handling equipment, Corrosive or wet environments where metal fasteners would degrade.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||