Engineered for robust performance in demanding environments, this M11 x 85mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its durable nylon construction ensures reliable fastening without the risk of galvanic corrosion.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M11 |
| Length | 85mm |
| Head Width | 29mm |
Built to exacting engineering tolerances, this M11 x 85mm Hex Head Cap Screw features a 29mm head width for optimal torque application. Constructed from high-density Nylon 6/6, it exhibits excellent tensile strength, chemical resistance to a wide range of solvents and oils, and a wide operating temperature range. Its inherent dielectric properties make it ideal for electrical and electronic assembly, marine applications, and environments where conductivity is a concern. The precise threading ensures secure and consistent engagement with standard M11 threaded components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool (e.g., socket wrench or hex key) matching the 29mm head width. 2. Insert the M11 thread into the pre-tapped hole or nut. 3. Apply gradual, consistent torque to achieve the desired clamping force, avoiding over-tightening to prevent stripping or damage to the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, leading to thread stripping or head deformation. | Employ a torque wrench and adhere to recommended torque values for nylon fasteners to ensure joint integrity without damaging the screw. |
| Using in applications requiring high load-bearing capacity or extreme temperature resistance beyond nylon's capabilities. | Evaluate the application's load and temperature requirements and select a fastener material (e.g., stainless steel) that meets or exceeds these specifications if nylon is insufficient. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical and electronic enclosure assembly, Corrosion-resistant industrial machinery, Marine and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||