Engineered for robust performance, this M11 x 80mm Nylon Hex Head Cap Screw offers exceptional strength and chemical resistance. Its non-conductive properties make it ideal for electrical and corrosive applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M11 |
| Length | 80mm |
| Head Width | 9mm |
Purpose-built for heavy-duty applications, this M11 x 80mm Nylon Hex Head Cap Screw features a nominal diameter of M11 and a full length of 80mm. The hex head measures 9mm across flats, ensuring secure engagement with standard tooling. Manufactured from high-grade nylon, it exhibits excellent tensile strength, impact resistance, and superior corrosion resistance compared to metallic fasteners. Its dielectric properties provide reliable electrical insulation, preventing short circuits in sensitive systems. The inherent flexibility of nylon allows for slight vibration dampening. This fastener is an optimal choice for environments where chemical exposure, moisture, or electrical conductivity are concerns, including industrial machinery, marine equipment, and chemical processing plants.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M11 hex socket or wrench. 2. Insert the cap screw into the pre-drilled or tapped hole. 3. Tighten the screw to the recommended torque specification for nylon fasteners, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to stripping of threads or head deformation. | Use a torque wrench set to the appropriate low torque value for nylon, or tighten by feel until snug and secure without excessive force. |
| Using the wrong size hex tool, which can damage the head and lead to improper seating. | Always use a precisely sized M11 hex socket or wrench to ensure full engagement and prevent slippage. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation in control panels and enclosures, Corrosive environments such as chemical processing plants, Lightweight assemblies in automotive and aerospace.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||