Engineered for extreme environments, this M11 x 75mm Hex Head Cap Screw boasts superior strength-to-weight ratio and exceptional corrosion resistance due to its Grade 5 Titanium construction. Ideal for critical structural applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M11 |
| Length | 75mm |
| Head Width | 10mm |
A high-performance industrial component, this Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), offering an exceptional combination of high tensile strength (950 MPa minimum) and low density (4.43 g/cm³). Its M11 diameter and 75mm length, coupled with a nominal head width of 10mm, ensure robust and secure fastening in demanding assemblies. The material's inherent biocompatibility and resistance to saltwater corrosion make it a premier choice for marine, aerospace, and medical device manufacturing where reliability under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of contaminants. 2. Hand-thread the cap screw to the desired depth to prevent cross-threading. 3. Utilize a calibrated torque wrench to apply the specified tightening torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading due to improper initial engagement. | Always start threading by hand to verify alignment before applying any tools. |
| Over-tightening, leading to thread stripping or component damage. | Consult engineering specifications for the correct torque values and use a calibrated torque wrench for precise application. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, Marine and offshore equipment, High-performance automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||