This M11 x 55mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric strength. Its lightweight yet robust construction makes it ideal for environments where metal fasteners are unsuitable due to conductivity or chemical exposure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M11 |
| Length | 55mm |
| Head Width | 12mm |
Specified by design engineers worldwide, this M11 x 55mm Nylon Hex Head Cap Screw is manufactured from high-performance nylon, providing superior tensile strength and resistance to a wide range of chemicals and solvents. The M11 thread size ensures robust engagement, with a nominal length of 55mm and a precisely engineered 12mm head width for optimal torque application using standard hex tools. Its non-conductive properties and low friction coefficient make it a preferred choice for electrical insulation, automotive components, and applications requiring reduced vibration and noise.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the cap screw to confirm proper engagement and avoid cross-threading. 3. Tighten using an appropriate hex wrench to the recommended torque specification, taking care not to overtighten and strip the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or material deformation. | Utilize a torque wrench set to the manufacturer's recommended specification for nylon fasteners, or apply a snug, firm tightening without excessive force. |
| Using excessive force to overcome initial resistance, assuming it's a metallic thread. | Always start by hand-threading to ensure smooth engagement. If resistance is met early, back out and re-align to prevent damage to the nylon threads. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and insulation, Automotive components and trim, Lightweight assembly in marine environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||