This M11 x 27mm Nylon Hex Head Cap Screw provides a lightweight, non-conductive fastening solution. Its excellent chemical resistance makes it ideal for corrosive environments, offering reliable performance where metal fasteners fail.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M11 |
| Length | 27mm |
| Head Width | 8mm |
Manufactured under strict quality controls, this M11 x 27mm Nylon Hex Head Cap Screw features a nominal diameter of M11 and a length of 27mm, with a head width of 8mm. Constructed from high-performance nylon, it exhibits superior resistance to a wide range of chemicals, solvents, and moisture, preventing corrosion and degradation. Its dielectric properties make it an excellent choice for electrical insulation applications, ensuring safety and preventing short circuits. The robust nylon material offers a good balance of strength and flexibility, suitable for dynamic loads and vibration resistance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool (e.g., wrench or socket) compatible with the 8mm hex head. 2. Align the screw with the pre-drilled or tapped hole. 3. Manually thread the screw into the mating component until snug, avoiding overtightening. 4. Apply final torque as specified for the application, ensuring a secure fit without stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to thread stripping or head fracture. | Use a torque wrench set to the manufacturer's recommended specification for nylon fasteners, or tighten by feel to snug plus a quarter turn. |
| Using the wrong size tool, which can strip the hex head and prevent proper tightening or removal. | Ensure the tool's hex size precisely matches the 8mm head width of the screw. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Corrosion-prone environments (chemical processing, marine), Electrical insulation and isolation, Lightweight assembly in aerospace and automotive.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||