This M11 x 149mm Nylon Hex Head Cap Screw offers excellent corrosion resistance and dielectric strength. Its lightweight, non-magnetic properties make it ideal for specialized applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M11 |
| Length | 149mm |
| Head Width | 11mm |
Manufactured under strict quality controls, this M11 x 149mm Hex Head Cap Screw is fabricated from high-performance nylon. The material exhibits superior resistance to a broad spectrum of chemicals, solvents, and moisture, ensuring long-term integrity in demanding environments. With a head width of 11mm, it provides adequate bearing surface for secure fastening without excessive bulk. Its non-conductive nature makes it a preferred choice for electrical insulation and applications where galvanic corrosion is a concern. The dimensional accuracy and material uniformity guarantee consistent performance and reliability in assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate wrench or socket for the 11mm hex head. 2. Hand-thread the screw to engage threads fully and prevent cross-threading. 3. Torque to manufacturer's recommended specification for nylon fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, stripping threads or deforming the head. | Use a torque wrench set to the appropriate low torque value for nylon fasteners or tighten by feel, stopping when resistance significantly increases. |
| Using in high-temperature applications beyond nylon's thermal limits. | Verify the operating temperature range of the specific nylon grade against the application's maximum expected temperature. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and component mounting, Chemical processing equipment, Medical device assembly, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||