Engineered from premium brass, this M11 x 132mm hex head cap screw offers superior corrosion resistance and excellent machinability. Ideal for electrical, marine, and decorative applications requiring a robust yet aesthetically pleasing fastener.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M11 |
| Length | 132mm |
| Head Width | 9mm |
A high-performance industrial component, this M11 x 132mm hex head cap screw is manufactured from solid brass, offering inherent corrosion resistance and non-magnetic properties. The M11 metric thread provides robust engagement for secure fastening. Its 132mm length allows for deep penetration in assemblies, while the 9mm head width ensures adequate bearing surface for torque application. The hex drive facilitates reliable tool engagement for consistent tightening. This fastener is well-suited for environments where moisture, chemicals, or aesthetic considerations are paramount, such as in marine hardware, electrical connectors, and decorative architectural elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate wrench size for the 9mm hex head. 2. Align screw threads with the pre-tapped hole or nut. 3. Apply steady torque until the desired tension is achieved, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect wrench size, leading to head stripping. | Utilize a precisely sized wrench for the 9mm hex head to ensure proper engagement and prevent damage. |
| Cross-threading the M11 screw, damaging both components. | Carefully align the screw threads with the mating threads before initiating rotation to prevent cross-threading. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and busbars, Decorative architectural elements, Corrosive environment assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||