Engineered for extreme environments, this M10x90mm Hex Head Cap Screw from Titanium Grade 5 offers exceptional strength-to-weight ratio and superior corrosion resistance, ensuring reliable fastening in critical applications.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 90mm |
| Head Width | 22mm |
A high-performance industrial component, this M10x90mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent tensile strength, fatigue resistance, and biocompatibility. The M10 thread provides robust load-bearing capacity, while the 90mm length offers substantial engagement in mating components. The 22mm hex head ensures optimal torque transfer with standard tooling, minimizing installation effort and maximizing fastener integrity. Ideal for aerospace, medical implants, chemical processing, and marine applications where lightweight, high strength, and corrosion immunity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant or anti-seize compound if specified for the application. 3. Engage the screw by hand to prevent cross-threading, then tighten to the specified torque using a calibrated torque wrench. 4. Verify proper seating and engagement of the threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the screw, leading to thread damage or fastener fracture. | Always use a calibrated torque wrench and adhere to recommended torque specifications for the material and application. |
| Using incorrect tooling, such as an ill-fitting hex key, which can strip the head. | Use a properly sized and high-quality hex key or socket to ensure maximum contact and prevent damage to the screw head. |
| Ignoring thread preparation, such as dirt or damage on the mating threads. | Thoroughly inspect and clean both the screw threads and the receiving threads before installation to ensure smooth engagement and prevent galling. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace and Aviation Components, Medical Device Manufacturing, Chemical and Petrochemical Processing Equipment, High-Performance Automotive and Motorsport, Marine and Offshore Structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||