Engineered for high-strength fastening, this M10x84mm carbon steel hex head cap screw offers superior load-bearing capacity and durability for demanding industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 84mm |
| Head Width | 9mm |
Built to exacting engineering tolerances, this M10x84mm hex head cap screw is manufactured from premium carbon steel, offering a Rockwell hardness of 25-32HRC for exceptional strength and resistance to deformation. The precise M10 thread pitch ensures secure mating with compatible nuts and tapped holes, while the 84mm length provides ample thread engagement for robust connections. The 9mm hex head width is optimized for standard tooling, facilitating efficient installation and removal. This design makes it suitable for applications subjected to significant static and dynamic loads, including structural assembly, machinery mounting, and heavy equipment fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate torque wrench calibrated for the specified torque value. 2. Ensure the mating threads are clean and free of debris. 3. Tighten the hex head cap screw to the recommended torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to head stripping. | Always use a wrench that precisely fits the 9mm hex head to prevent damage. |
| Cross-threading the screw into the mating component. | Start threading the screw by hand to ensure proper alignment before applying torque. |
A: This Hex Head Cap Screw, Carbon Steel is manufactured from Carbon Steel.
A: Heavy machinery assembly, Structural steel connections, Automotive manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||