This M10x70mm Nylon Hex Head Cap Screw offers excellent corrosion resistance and dielectric properties. Ideal for environments where metal fasteners are unsuitable due to chemical exposure or electrical conductivity requirements.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M10 |
| Length | 70mm |
| Head Width | 14mm |
Precision-manufactured to tight tolerances, this M10x70mm Hex Head Cap Screw is constructed from high-quality Nylon, offering superior chemical resistance to many solvents, oils, and bases. Its non-conductive nature makes it suitable for electrical insulation applications. The M10 thread provides robust fastening strength for its size, while the 70mm length offers significant grip. The 14mm head width ensures compatibility with standard M10 tooling, facilitating secure installation and reliable performance in a variety of industrial and commercial settings. Its lightweight design further enhances ease of handling and assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate M10 tooling (e.g., wrench or socket) with a 14mm drive size. 2. Insert the M10x70mm Nylon Hex Head Cap Screw into the pre-drilled or tapped hole. 3. Tighten the screw until snug, applying torque consistent with the tensile strength of Nylon and the application's load requirements. Avoid overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening Nylon screws | Apply torque carefully, respecting the material's properties. Consult application-specific torque charts if available. |
| Using standard metal tooling for removal/installation | Ensure tooling is in good condition and fits snugly to prevent stripping the nylon head. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment assembly, Corrosive chemical processing environments, Marine and outdoor applications requiring corrosion resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||