Engineered for superior performance in challenging conditions, this M10x67mm Aluminum 6061 Hex Head Cap Screw offers exceptional strength-to-weight ratio and corrosion resistance, making it a reliable fastening solution.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M10 |
| Length | 67mm |
| Head Width | 32mm |
Designed for demanding industrial environments, this M10x67mm Hex Head Cap Screw is precision-machined from premium Aluminum 6061. This alloy provides excellent corrosion resistance, good machinability, and a favorable strength-to-weight ratio, making it suitable for applications where weight reduction and environmental durability are critical. The M10 thread ensures robust engagement, while the 67mm length offers versatile fastening capabilities. The 32mm head width provides ample surface area for torque application, ensuring secure and reliable joint integrity. Ideal for use in aerospace, automotive, marine, and general manufacturing sectors seeking lightweight, corrosion-resistant fastening solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the mating tapped hole or nut to remove any contaminants. 2. Apply a suitable thread lubricant or anti-seize compound if required by the application environment to prevent galling and ensure proper torque. 3. Insert the screw and thread it into the mating component by hand or with a low-torque setting on a power tool. 4. Tighten the screw to the specified torque value using a calibrated torque wrench, ensuring even pressure and avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench on the hex head, leading to cam-out and damaged fastener heads. | Always use the correct size socket or wrench that fits snugly on the hex head to ensure maximum engagement and prevent damage. |
| Over-tightening the fastener, which can strip threads, crack components, or weaken the fastener itself due to excessive stress. | Adhere to the manufacturer's recommended torque specifications. If specifications are unavailable, consult engineering guidelines for the specific material and application. |
| Cross-threading the screw during installation, causing damage to both the screw and the mating threads. | Start threading the screw by hand for the first few turns to ensure it is properly aligned and engaging the threads correctly before applying any torque. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and body panels, Marine hardware and fittings, Lightweight industrial machinery assemblies, Electronic enclosures and heat sinks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||