Engineered for demanding environments, this M10x52mm Nylon Hex Head Cap Screw offers superior chemical resistance and dielectric properties. Its lightweight yet durable construction makes it ideal for diverse industrial applications where corrosion is a concern.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M10 |
| Length | 52mm |
| Head Width | 29mm |
Specified by design engineers worldwide, this M10x52mm Nylon Hex Head Cap Screw features a nominal thread diameter of M10 and a shank length of 52mm. The hex head exhibits a width of 29mm, providing ample surface area for torque application via standard wrenches or sockets. Constructed from high-performance nylon (polyamide), it offers excellent resistance to a broad spectrum of chemicals, including acids, alkalis, and solvents, while maintaining robust mechanical strength at moderate temperatures. Its non-conductive nature makes it a preferred choice for electrical insulation and in environments prone to galvanic corrosion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket size (typically 29mm across flats for the head width). 2. Align the screw with the pre-drilled or tapped hole, ensuring threads engage smoothly. 3. Apply consistent torque to secure the assembly, avoiding overtightening which can damage nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nylon fasteners can strip threads or cause material deformation. | Use a torque wrench calibrated for plastic fasteners and apply only the recommended torque for the specific application. |
| Using standard steel washers with nylon screws can lead to uneven load distribution and damage. | Employ nylon washers or flat washers with a larger diameter to distribute the load more effectively and protect the nylon surface. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical equipment assembly, Chemical processing machinery, Corrosion-prone environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||