Engineered for reliable fastening, this M10x42mm brass hex cap screw offers superior corrosion resistance and electrical conductivity. Its robust design ensures secure connections in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 42mm |
| Head Width | 26mm |
Specified by design engineers worldwide, this M10x42mm brass hex cap screw features a nominal diameter of M10, a length of 42mm, and a head width of 26mm for optimal torque application. Manufactured from high-grade brass, it exhibits excellent resistance to corrosion, particularly in marine and humid environments, and offers non-magnetic properties and high electrical conductivity, making it suitable for electrical and decorative applications where aesthetics and performance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the screw initially to prevent cross-threading. 3. Tighten to the specified torque using an appropriate wrench or socket, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force leading to stripped threads or fastener breakage. | Adhere to recommended torque specifications for brass fasteners. Use a torque wrench if precision is required. |
| Cross-threading the screw during initial engagement. | Start threading by hand for several turns to ensure proper alignment before applying any tool. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Plumbing and water systems, Electrical connectors and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||