This M10x26mm Hex Head Cap Screw, forged from high-strength Aluminum 6061, offers exceptional corrosion resistance and a lightweight profile. Ideal for demanding environments where weight reduction and material integrity are paramount.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 26mm |
| Head Width | 32mm |
Trusted by engineers across multiple sectors, this M10x26mm Hex Head Cap Screw is manufactured from Aluminum 6061-T6, a precipitation-hardened alloy renowned for its excellent strength-to-weight ratio, good corrosion resistance, and weldability. With a nominal thread size of M10 and a precise 26mm length, it features a substantial 32mm hex head for reliable torque application using standard tooling. The material's inherent properties make it suitable for applications in aerospace, automotive, marine, and electronics where reducing mass and preventing galvanic corrosion are critical design considerations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove debris and ensure proper thread engagement. 2. Apply a suitable lubricant or anti-seize compound to the threads, if recommended for the specific application. 3. Insert the cap screw and engage the threads by hand to prevent cross-threading. 4. Tighten the cap screw to the manufacturer's recommended torque specification using an appropriate hex wrench or socket.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can strip the threads or damage the mating material. | Always adhere to the specified torque values. Use a calibrated torque wrench for critical applications. |
| Using the wrong size hex wrench, leading to cam-out and damage to the screw head. | Ensure the hex wrench fits snugly and correctly matches the head dimensions. |
| Not cleaning mating surfaces, which can lead to poor joint integrity and premature failure. | Thoroughly clean all surfaces that will come into contact with the screw and the clamped components. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive lightweighting assemblies, Marine hardware and fittings, Electronic enclosures and chassis.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||