Engineered for reliability, this M10x25mm Hex Cap Screw features corrosion-resistant Aluminum 6061. Its robust design and precise dimensions ensure secure fastening in demanding industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M10 |
| Length | 25mm |
| Head Width | 30mm |
A proven choice for industrial professionals, this Hex Head Cap Screw is manufactured from Aluminum 6061, renowned for its excellent strength-to-weight ratio, corrosion resistance, and moderate machining capabilities. With a M10 thread size and a length of 25mm, it provides a secure and reliable fastening solution. The substantial 30mm head width offers ample bearing surface, distributing load effectively and reducing the risk of material deformation. This specification makes it suitable for applications where weight reduction is critical without compromising structural integrity, such as in aerospace components, automotive assemblies, and precision instrumentation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the screw into the receiving component to confirm proper engagement and alignment. 3. Use an appropriately sized wrench or socket to tighten the screw to the specified torque, avoiding over-tightening to prevent thread damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, which can strip threads or deform the material. | Consult a torque chart for Aluminum 6061 fasteners and use a calibrated torque wrench. |
| Not properly cleaning mating threads, leading to binding or incomplete engagement. | Use a wire brush or solvent to clean both the screw threads and the tapped hole before installation. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace component assembly, Automotive lightweighting, Marine hardware and fixtures, Electronics enclosures and chassis.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||