Engineered from durable nylon, this M10x21mm hex head cap screw offers exceptional corrosion resistance and electrical insulation. Its lightweight design makes it ideal for sensitive applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M10 |
| Length | 21mm |
| Head Width | 15mm |
Precision-manufactured to tight tolerances, this M10x21mm Nylon Hex Head Cap Screw boasts a nominal diameter of M10, a shank length of 21mm, and a head width of 15mm. The high-performance nylon material provides excellent dielectric strength, chemical resistance to many solvents and alkalis, and a lightweight profile, making it suitable for applications where metal fasteners are undesirable due to conductivity, weight, or potential galvanic corrosion. Its inherent flexibility can also absorb vibration. The hex drive allows for secure tightening with standard tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the M10x21mm Nylon Hex Head Cap Screw into the receiving component to prevent cross-threading. 3. Tighten the screw using an appropriate hex driver or wrench, applying moderate torque to avoid stripping the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip the threads or crack the head. | Use a torque wrench set to the manufacturer's recommended torque for nylon fasteners or tighten with moderate hand pressure. |
| Using metal tools on nylon threads, which can cause damage. | Utilize nylon or plastic-tipped tools, or ensure metal tools are used with extreme caution and minimal force. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and assemblies, Corrosive environments, Medical equipment manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||