This M10 x 141mm brass hex head cap screw provides superior corrosion resistance and aesthetic appeal. Its robust construction ensures reliable fastening in diverse environments. Ideal for applications requiring both strength and visual quality.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 141mm |
| Head Width | 35mm |
Engineered for reliability and performance, this M10 x 141mm hex head cap screw is manufactured from high-grade brass (specific alloy to be detailed in technical datasheet). Its M10 metric thread conforms to international standards, ensuring precise and secure engagement. The substantial 35mm head width provides ample surface area for torque application with standard wrenches, minimizing deformation under load. Brass's inherent resistance to corrosion makes this fastener exceptionally suited for environments exposed to moisture, chemicals, and saltwater, preventing premature degradation and maintaining structural integrity. Its non-magnetic properties are also advantageous in specific sensitive applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating thread is clean and free from debris. 2. Insert the cap screw through the components to be joined. 3. Tighten the cap screw using a properly sized wrench until snug, then apply additional torque according to design specifications to achieve desired clamping force. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to head damage. | Always use a wrench that precisely fits the hex head to prevent stripping or deformation. |
| Over-tightening, potentially stripping threads or weakening the joint. | Adhere to specified torque values. If unknown, tighten until snug and then apply a controlled additional turn, observing for resistance. |
| Using in applications requiring high tensile strength or extreme shear loads. | Brass is generally softer than steel. Select fasteners appropriate for the specific load requirements of your application. Consult material strength data. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Architectural fixtures and decorative elements, Electrical connectors and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||