This M10x126mm Hex Head Cap Screw is manufactured from high-strength polycarbonate, offering exceptional corrosion resistance and dielectric properties. Its robust design ensures reliable fastening in challenging environments where metal alternatives would degrade.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M10 |
| Length | 126mm |
| Head Width | 36mm |
Engineered for reliability and performance, this M10x126mm Hex Head Cap Screw features a nominal diameter of 10mm and a substantial 126mm length, providing ample grip and clamping force. The expansive 36mm head width distributes load effectively, minimizing stress on mating components. Composed of premium polycarbonate, this fastener exhibits excellent resistance to a broad spectrum of chemicals, solvents, and UV radiation, making it suitable for wet, corrosive, or outdoor applications. Its inherent non-conductive nature eliminates concerns about electrical conductivity, a critical factor in sensitive electronic assemblies or environments prone to electrical arcing. The material's lightweight profile also contributes to reduced overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the M10x126mm polycarbonate cap screw into the receiving component until snug. 3. Using an appropriate sized wrench on the hex head, tighten to the recommended torque specification for polycarbonate fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to thread stripping or material cracking. | Utilize a torque wrench set to the appropriate specification for plastic fasteners and tighten incrementally. |
| Using excessive force with an improperly sized wrench, potentially damaging the hex head. | Always use a wrench that precisely fits the M10 hex head to prevent slippage and damage. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Chemical processing equipment, Medical device assemblies, Outdoor electronic enclosures, Water treatment systems, Electrical insulation applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||