This M10x125mm Hex Head Cap Screw, crafted from premium 304 stainless steel, offers exceptional corrosion resistance and superior tensile strength for critical fastening applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 125mm |
| Head Width | 18mm |
A high-performance industrial component, this M10x125mm Hex Head Cap Screw is manufactured from grade 304 stainless steel, renowned for its excellent corrosion resistance, particularly in environments exposed to moisture and mild chemicals. The M10 nominal diameter ensures robust load-bearing capacity, while the 125mm length provides significant grip for deep-threaded applications. The 18mm hexagonal head offers optimal torque transfer for secure tightening with standard wrenches, preventing stripping and ensuring a reliable connection. This material composition makes it ideal for use in marine, food processing, chemical, and outdoor construction settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench size (18mm) for the hex head. 2. Ensure the mating threads are clean and free from obstructions. 3. Thread the screw into the designated tapped hole or nut, applying consistent torque until the desired tightness is achieved, avoiding overtightening which can damage threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to head stripping. | Always use a properly sized 18mm wrench to ensure maximum grip and prevent damage to the hex head. |
| Overtightening, causing thread damage or screw failure. | Tighten the screw to the manufacturer's recommended torque specifications or to a snug fit that provides secure clamping force without excessive stress. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural assembly in corrosive environments, Marine equipment and fixtures, Food and beverage processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||