Engineered for robust performance, this M10x120mm hex head cap screw is crafted from premium 304 stainless steel. It offers superior corrosion resistance and high tensile strength for demanding fastening applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M10 |
| Length | 120mm |
| Head Width | 9mm |
Built to exacting engineering tolerances, this M10x120mm hex head cap screw features a nominal diameter of M10 and a length of 120mm. The head width measures 9mm, providing ample surface area for torque application with standard tooling. Fabricated from 304 stainless steel, it exhibits excellent resistance to a broad spectrum of corrosive environments, including saltwater and industrial chemicals, making it suitable for marine, chemical processing, and outdoor structural applications. Its inherent toughness ensures reliable performance under significant mechanical stress, fulfilling critical load-bearing requirements in robust assembly designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench size (17mm for this M10 screw). 2. Engage the wrench fully onto the hex head. 3. Apply steady torque to tighten the screw into the pre-tapped hole or mating component, ensuring proper thread engagement without over-tightening. 4. Verify secure fastening by checking for any play or movement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect wrench size, leading to stripping of the hex head. | Always use the specified wrench size for the corresponding screw head diameter. |
| Over-tightening, which can strip threads or compromise the integrity of the joint. | Tighten to the recommended torque specification for the application or until snug, avoiding excessive force. |
| Using standard steel screws in corrosive environments, leading to premature rust and failure. | Always utilize 304 stainless steel or a more corrosion-resistant material when exposed to moisture or corrosive agents. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural support in outdoor and marine environments, Assembly of machinery and equipment in chemical processing plants, High-strength fastening in automotive and aerospace applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||