This M10 x 88mm Nylon Hex Head Cap Screw offers exceptional strength and corrosion resistance. Its 22mm head width ensures secure engagement, making it ideal for demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 88mm |
| Head Width | 22mm |
Built to exacting engineering tolerances, this M10 x 88mm Nylon Hex Head Cap Screw is manufactured from high-performance, reinforced nylon. This material provides excellent tensile strength, chemical resistance, and electrical insulation properties, making it suitable for corrosive environments and applications where conductivity is undesirable. The precisely machined M10 thread ensures reliable mating with standard nuts and tapped holes. The 22mm hex head width is optimized for standard tooling, facilitating efficient installation and removal while providing ample bearing surface to prevent pull-through in softer materials. Its lightweight nature reduces overall assembly weight without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface and threaded hole are clean and free of debris. 2. Hand-thread the cap screw to engage the threads properly. 3. Use an appropriate hex wrench or socket to tighten the screw to the desired torque, avoiding over-tightening to prevent stripping or material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Use a torque wrench set to the manufacturer's recommended torque specification for nylon fasteners, or tighten until snug and then a quarter turn further. |
| Using standard steel or metal tools that may damage the nylon head. | Utilize tools specifically designed for nylon or plastic fasteners, or ensure the tool's edges are rounded to minimize stress concentration. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Medical equipment assemblies, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||