This M10 x 87mm hex head cap screw, crafted from robust 304 stainless steel, offers superior corrosion resistance and tensile strength for demanding fastening requirements.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 87mm |
| Head Width | 29mm |
Engineered for reliability and performance, this M10 x 87mm hex head cap screw features a nominal diameter of 10mm and a length of 87mm, ensuring precise fitment in critical assemblies. The 29mm wide hex head provides ample surface area for torque application via standard wrenching tools. Manufactured from premium 304 stainless steel (ASTM F593), it exhibits excellent resistance to a wide range of corrosive environments, including saltwater and chemical exposure, making it ideal for marine, food processing, and outdoor applications. Its inherent toughness and ductility prevent brittle fracture under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench size for the 29mm hex head. 2. Thread the M10 x 87mm cap screw into the pre-tapped hole or nut, ensuring smooth engagement of threads. 3. Apply torque to the specified design limits, ensuring a secure and stable joint without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to head stripping. | Always use a wrench that precisely fits the 29mm hex head to prevent damage and ensure proper torque application. |
| Cross-threading the screw, damaging both the screw and the mating component. | Carefully align the screw with the threads and start threading by hand to ensure proper engagement before applying mechanical torque. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and equipment, Food processing machinery, Chemical processing plants, Outdoor structural assemblies, General industrial construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||