This M10 x 86mm Hex Head Cap Screw, manufactured from high-strength Aluminum 6061, offers superior corrosion resistance and lightweight performance. Engineered for demanding environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 86mm |
| Head Width | 32mm |
Specified by design engineers worldwide, this M10 x 86mm Hex Head Cap Screw is crafted from Aluminum 6061, a precipitation-hardenable alloy known for its excellent strength-to-weight ratio, good corrosion resistance, and weldability. The M10 thread size ensures robust fastening, while the 86mm length provides ample grip. The 32mm head width facilitates secure tightening with standard tooling. This fastener is ideal for applications where weight reduction and resistance to environmental degradation are critical, such as in automotive chassis, aerospace components, and marine equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Insert the hex head cap screw into the designated hole. 3. Tighten the screw to the specified torque using a calibrated wrench, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening Aluminum 6061 screws | Use a torque wrench set to the manufacturer's recommended specification to prevent thread stripping or material deformation. |
| Using incorrect tooling for hex head | Utilize a properly sized hex bit or socket to ensure full engagement and prevent cam-out, which can damage the fastener head. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive lightweighting, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||