This M10 x 79mm brass hex cap screw offers exceptional corrosion resistance and moderate tensile strength. Featuring a standard hex head for reliable torque application, it's an excellent choice for demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 79mm |
| Head Width | 20mm |
Engineered for reliability and performance, this M10 x 79mm brass hex cap screw is manufactured from high-grade brass alloy, offering superior resistance to tarnishing and corrosion, particularly in marine or humid environments. The M10 thread size ensures robust load-bearing capacity, while the 79mm length provides ample engagement for various joint thicknesses. The 20mm hex head width is optimized for standard wrench and socket sizes, facilitating secure and precise tightening. Brass's inherent non-sparking properties also make it suitable for hazardous atmospheres.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 20mm hex head. 2. Ensure the mating threads are clean and free of debris. 3. Thread the screw into the female component by hand to confirm alignment, then tighten to the required torque specification using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening brass screws, which can lead to thread stripping or deformation. | Always adhere to the recommended torque values for brass fasteners to prevent damage. |
| Using brass screws in high-stress applications where their tensile strength may be insufficient. | Verify the material's suitability for the specific load requirements of your application. Consider higher-strength alloys if necessary. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and equipment, Architectural and decorative elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||