This M10 x 72mm Nylon Hex Head Cap Screw offers a lightweight, non-conductive, and corrosion-resistant fastening solution. Ideal for applications where metal fasteners are unsuitable due to electrical or chemical sensitivities.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 72mm |
| Head Width | 30mm |
Precision-manufactured to tight tolerances, this M10 x 72mm Hex Head Cap Screw is constructed from high-performance Nylon 6/6. Its inherent dielectric strength and excellent resistance to a broad range of chemicals, including solvents and mild acids, make it suitable for environments where electrical insulation or chemical inertness is paramount. The M10 thread provides robust engagement, while the 72mm length ensures adequate grip for medium-duty applications. The 30mm head width offers a substantial bearing surface for even load distribution, minimizing stress on the mating material. This screw is an excellent choice for assembly in electronics, automotive components, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the Nylon Hex Head Cap Screw to engage the first few threads, verifying proper alignment. 3. Using an appropriate size wrench or socket, tighten the screw to the desired torque specification, avoiding over-tightening which can strip the nylon threads or damage the mating material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or material deformation. | Use a torque wrench set to the recommended value for nylon fasteners, or hand-tighten until snug and then apply a small additional turn. |
| Using a metal wrench that can damage the nylon head. | Utilize a nylon, plastic, or appropriately sized socket wrench to avoid scratching or deforming the hex head. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and insulation, Lightweight assembly in aerospace and automotive, Chemical processing equipment where corrosion resistance is critical.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||