Engineered for robust performance, this M10 x 71mm Nylon Hex Head Cap Screw offers superior corrosion resistance and dielectric properties. Its durable nylon construction ensures reliable fastening in challenging environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M10 |
| Length | 71mm |
| Head Width | 17mm |
Purpose-built for heavy-duty applications, this M10 x 71mm Nylon Hex Head Cap Screw features a nominal diameter of M10 and a precise length of 71mm, ensuring proper engagement. The head width measures 17mm, providing ample surface area for torque application. Manufactured from high-performance nylon, it exhibits exceptional resistance to a wide range of chemicals, solvents, and moisture, making it ideal for corrosive atmospheres and environments where electrical conductivity is a concern. Its inherent lightweight nature also contributes to reduced overall assembly weight without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the cap screw into the designated hole to verify alignment and avoid cross-threading. 3. Using an appropriate wrench or socket, tighten the cap screw to the required torque specification. Avoid overtightening, which can strip nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening nylon screws | Use a torque wrench and adhere to manufacturer-recommended torque values for nylon fasteners to prevent thread stripping or material deformation. |
| Using in high-temperature applications exceeding nylon's limit | Verify the operating temperature of the application against the material's thermal specifications to ensure it remains within the nylon's functional range. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical processing equipment, Electrical insulation components, Marine and coastal installations, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||