This M10 x 65mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Its lightweight, non-magnetic properties make it a superior choice for demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 65mm |
| Head Width | 13mm |
Engineered for reliability and performance, this M10 x 65mm Nylon Hex Head Cap Screw features a robust head width of 13mm for secure fastening. Constructed from high-grade Nylon, it exhibits excellent chemical resistance, superior dielectric strength, and is inherently non-corrosive, making it ideal for use in harsh chemical processing, electrical insulation, and saltwater environments. Its lightweight nature reduces overall assembly weight without compromising structural integrity for its intended applications. The M10 thread provides a standard, strong mechanical connection suitable for a wide range of assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Insert the Nylon Hex Head Cap Screw and thread by hand to avoid cross-threading. 3. Tighten to the recommended torque specification for Nylon fasteners, typically a lower torque than metal fasteners to prevent stripping or damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening plastic fasteners, leading to thread stripping or head fracture. | Always use a torque wrench and adhere to recommended torque values for Nylon fasteners. Hand-tightening followed by a small, controlled turn is often sufficient. |
| Using Nylon fasteners in high-temperature or high-load applications where their mechanical properties may be compromised. | Verify that the application's temperature and load requirements are within the operational limits of Nylon. Consider alternative materials like stainless steel for higher performance needs. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical component assembly, Marine and offshore equipment, Chemical processing equipment, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||