This M10 x 60mm Hex Head Cap Screw, crafted from durable polycarbonate, offers superior corrosion resistance and electrical insulation. Its robust design ensures reliable fastening in demanding applications where traditional metals may fail.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M10 |
| Length | 60mm |
| Head Width | 35mm |
Built to exacting engineering tolerances, this M10 x 60mm hex head cap screw features a nominal diameter of 10mm and a length of 60mm, with a generous head width of 35mm for enhanced load distribution. Constructed from high-performance polycarbonate, it exhibits exceptional impact strength, a high tensile modulus, and excellent dielectric properties, making it inherently resistant to a wide range of chemicals and environmental factors. Its non-conductive nature makes it ideal for applications requiring electrical isolation, while its lightweight profile contributes to reduced overall assembly weight. This material's inherent toughness ensures reliable performance in vibration-prone environments and under significant stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Thread the polycarbonate hex head cap screw into the receiving component by hand to prevent cross-threading. 3. Tighten using an appropriate socket wrench, applying torque gradually until the desired clamping force is achieved, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the polycarbonate screw, which can lead to stripping or cracking of the threads. | Use a torque wrench to apply the recommended tightening torque for polycarbonate fasteners, or tighten until snug and then back off slightly. |
| Using excessive force when driving the screw, potentially damaging the hex head or the tool. | Use the correct size socket or wrench that fits snugly to the hex head to ensure even pressure and prevent cam-out. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Corrosive chemical processing equipment, Electrical enclosures and insulation, Marine and outdoor applications requiring weather resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||