This M10 x 59mm Nylon Hex Head Cap Screw provides robust, non-conductive fastening. Its corrosion-resistant properties and lightweight design make it suitable for a wide range of industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M10 |
| Length | 59mm |
| Head Width | 23mm |
Trusted by engineers across multiple sectors, this M10 x 59mm Nylon Hex Head Cap Screw features a nominal diameter of M10 and a total length of 59mm. The hex head measures 23mm across flats, facilitating secure tightening with standard tooling. Constructed from high-performance nylon, it exhibits superior resistance to chemicals, moisture, and electrical conductivity, making it an excellent choice for applications where corrosion or short-circuiting is a concern. Its inherent flexibility also allows for slight vibration dampening.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool (e.g., wrench or socket) with a size suitable for the M10 hex head. 2. Carefully thread the cap screw into the pre-drilled or tapped hole, ensuring proper alignment to avoid cross-threading. 3. Apply consistent, moderate torque to achieve a secure fastening without overtightening, which could damage the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, leading to stripped threads or material deformation. | Use a torque wrench set to the recommended specification for nylon fasteners, or apply firm, consistent pressure without excessive force. |
| Using metal tools that can scratch or damage the nylon surface, compromising its insulation properties. | Employ tools specifically designed for plastic fasteners or ensure metal tools are smooth and free of burrs. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panels, Chemical processing equipment, Marine and outdoor applications, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||