Engineered for robust industrial applications, this M10 x 56mm hex head cap screw features superior 304 stainless steel construction. It offers exceptional corrosion resistance and high tensile strength for secure and lasting fastenings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 56mm |
| Head Width | 20mm |
Designed for demanding industrial environments, this M10 x 56mm hex head cap screw is manufactured from premium 304 stainless steel, renowned for its excellent corrosion and oxidation resistance, particularly in humid or chemical-laden atmospheres. The 20mm hex head provides ample surface area for torque application, ensuring secure installation with standard tools. This fastener exhibits high tensile strength, making it suitable for load-bearing applications where reliability is paramount. Its robust construction guarantees performance across a wide temperature range and resists galvanic corrosion when paired with compatible materials.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Insert the cap screw through the assembled components. 3. Tighten the cap screw to the recommended torque specification using an appropriately sized hex wrench or socket.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade stainless steel or carbon steel in corrosive environments. | Always specify 304 or 316 stainless steel for applications exposed to moisture, chemicals, or salt spray to prevent premature corrosion and failure. |
| Over-tightening the cap screw, leading to thread stripping or material deformation. | Consult engineering drawings or fastener torque charts for the correct torque specification for the M10 size and material to avoid overstressing the threads. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural assembly in food processing equipment, Marine hardware and boat building, Chemical processing plant maintenance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||