Engineered from high-performance Titanium Grade 5, this M10 x 55mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance for critical fastening applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M10 |
| Length | 55mm |
| Head Width | 15mm |
Manufactured under strict quality controls, this M10 x 55mm hex head cap screw is forged from Titanium Grade 5 (Ti-6Al-4V), renowned for its excellent biocompatibility, high tensile strength (approx. 900 MPa), and superior fatigue resistance. The 15mm hex head provides ample engagement for standard tooling, ensuring secure installation and removal. Its inherent corrosion immunity makes it ideal for marine, aerospace, chemical processing, and medical implant applications where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-thread the screw to verify alignment and prevent cross-threading. 3. Utilize a calibrated torque wrench to tighten the screw to the specified torque value, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the titanium screw, which can lead to thread stripping or fastener failure. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Titanium Grade 5 fasteners. |
| Using standard steel tools that can gall or damage the softer titanium threads. | Employ tools specifically designed for titanium or ensure proper lubrication to minimize galling. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and marine hardware, Chemical processing equipment, Corrosive environment fastening.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||