This M10 x 52mm Nylon Hex Head Cap Screw offers superior corrosion resistance and dielectric properties. Its robust nylon construction ensures reliable fastening in demanding environments where metal fasteners fail.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M10 |
| Length | 52mm |
| Head Width | 30mm |
Engineered for reliability and performance, this M10 x 52mm Hex Head Cap Screw is manufactured from high-strength, chemically inert nylon. Its 30mm head width provides ample bearing surface for secure tightening. The material's excellent dielectric strength makes it ideal for electrical applications, preventing short circuits. Nylon's inherent corrosion resistance ensures longevity in humid, acidic, or alkaline conditions, eliminating the risk of rust and degradation common with metal fasteners. This makes it a preferred choice for applications requiring non-conductivity and resistance to environmental factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M10 internal thread. 2. Insert the Nylon Hex Head Cap Screw through the component to be fastened. 3. Tighten the screw using a suitable wrench on the hex head until snug. Avoid over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw. | Tighten the screw until snug. Nylon can deform under excessive torque; use a torque wrench if precise values are required and consult material data for maximum allowable torque. |
| Using in applications requiring high tensile strength or significant shear load. | Assess the load requirements. While strong, nylon has lower tensile and shear strength compared to many metals. Choose metal fasteners for high-stress applications. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation assemblies, Chemical processing equipment, Marine and offshore structures, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||