Engineered for demanding industrial environments, this M10 x 48mm Nylon Hex Head Cap Screw provides superior corrosion resistance and electrical insulation. Its robust design ensures reliable fastening in diverse applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M10 |
| Length | 48mm |
| Head Width | 30mm |
A proven choice for industrial professionals, this M10 x 48mm Nylon Hex Head Cap Screw is manufactured from high-performance nylon, offering excellent chemical resistance, dielectric properties, and a lightweight profile. With a nominal diameter of M10, a length of 48mm, and a head width of 30mm, it provides substantial bearing surface and secure clamping. The material's inherent non-conductive nature makes it ideal for applications where electrical isolation is critical, such as in control panels, circuit boards, and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating components are clean and free from debris. 2. Hand-thread the M10 Nylon Hex Head Cap Screw into the corresponding tapped hole or nut. 3. Tighten using a suitable wrench or socket to the recommended torque specification for nylon fasteners, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the nylon screw, which can lead to stripping or deformation of the threads. | Use a torque wrench set to the manufacturer's recommended torque for nylon fasteners to prevent damage. |
| Using in high-temperature applications exceeding nylon's thermal limits. | Verify the operating temperature range of nylon and select an alternative material if the application exceeds these limits. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical Processing Equipment, Electrical Enclosures and Control Panels, Medical Devices and Instrumentation, Lightweight Assembly, Corrosive Environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||