This M10 x 47mm Hex Head Cap Screw is engineered from high-performance polycarbonate. Its exceptional impact resistance and lightweight properties make it ideal for applications where traditional metal fasteners are unsuitable.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M10 |
| Length | 47mm |
| Head Width | 26mm |
Manufactured under strict quality controls, this M10 x 47mm hex head cap screw boasts a 26mm head width, providing excellent torque distribution. The polycarbonate material offers superior electrical insulation, excellent chemical resistance to a wide range of solvents and acids, and remarkable impact strength, even at low temperatures. This makes it a preferred choice for environments where corrosion, conductivity, or weight are critical concerns. Its clarity also allows for visual inspection of the joint in certain applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M10 internal thread. 2. Insert the polycarbonate hex head cap screw through the components to be joined. 3. Tighten the screw using a standard wrench or socket, applying controlled torque to avoid over-stressing the polycarbonate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw. | Apply only the necessary torque to secure the joint. Excessive force can cause thread stripping or deformation of the polycarbonate. |
| Using in applications with extreme thermal cycling without verification. | While polycarbonate offers good thermal stability, verify its suitability for applications with rapid or extreme temperature fluctuations that exceed its operational limits. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment, Medical devices and laboratory equipment, Automotive interior components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||