This M10 x 45mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and electrical insulation. Its robust nylon construction ensures reliable fastening in demanding environments where traditional metal fasteners may fail.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 45mm |
| Head Width | 32mm |
A high-performance industrial component, this M10 x 45mm Hex Head Cap Screw is engineered from durable, high-strength nylon. Its specifications include a nominal thread diameter of M10, a nominal length of 45mm, and a substantial head width of 32mm for effective torque application. The inherent properties of nylon, such as its excellent dielectric strength, resistance to a wide range of chemicals, and low coefficient of friction, make it suitable for applications requiring non-conductivity, vibration dampening, or protection against galvanic corrosion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to verify alignment and prevent cross-threading. 3. Tighten using an appropriate wrench or socket, applying only the required torque to avoid stripping or damaging the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or head deformation. | Use a torque wrench to adhere to manufacturer-specified torque limits for nylon fasteners. |
| Using in applications with extreme temperature fluctuations beyond nylon's operational range. | Consult material datasheets for temperature limitations and select alternative materials if operating temperatures exceed recommendations. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment mounting, Chemical processing equipment, Marine and saltwater environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||