This M10 x 42mm Nylon Hex Head Cap Screw offers exceptional strength-to-weight ratio and superior corrosion resistance. Its non-conductive properties make it ideal for specialized applications where electrical isolation is critical.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M10 |
| Length | 42mm |
| Head Width | 30mm |
Purpose-built for heavy-duty applications, this M10 x 42mm Nylon Hex Head Cap Screw features a robust design with a head width of 30mm. Constructed from high-performance nylon, it exhibits excellent tensile strength, good impact resistance, and outstanding resistance to chemicals and UV radiation. The material's inherent electrical insulation properties make it a safe choice for applications where stray currents are a concern. Its lightweight nature reduces overall assembly weight without compromising structural integrity, making it suitable for environments demanding durability and resistance to corrosion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a tapped hole or nut. 2. Insert the M10 x 42mm Nylon Hex Head Cap Screw, ensuring proper alignment. 3. Tighten the screw using a suitable wrench or socket, applying consistent torque to achieve secure fastening without over-stressing the nylon material. Consult material datasheets for specific torque recommendations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to material deformation or stripping. | Use a torque wrench and adhere to manufacturer-recommended torque specifications for nylon fasteners. Avoid excessive force. |
| Using the nylon screw in applications exceeding its temperature or load-bearing limits. | Refer to the nylon material's technical data sheet for operating temperature ranges and maximum tensile/shear strengths. Select fasteners appropriate for the specific application demands. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment mounting, Corrosive chemical processing environments, Medical device assembly, Aerospace and automotive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||