Engineered for demanding environments, this M10 x 39mm Hex Head Cap Screw offers exceptional durability and corrosion resistance. Its polycarbonate construction provides electrical insulation and lightweight strength for critical fastening needs.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 39mm |
| Head Width | 19mm |
A proven choice for industrial professionals, this M10 x 39mm Hex Head Cap Screw features a robust polycarbonate construction, offering superior resistance to corrosion, chemicals, and impact compared to traditional metal fasteners. With a nominal diameter of M10 and a length of 39mm, it provides secure fastening in a wide range of applications. The head width of 19mm ensures compatibility with standard M10 tooling. Polycarbonate's inherent non-conductive properties make it ideal for electrical assemblies, marine environments, and areas where galvanic corrosion is a concern. Its lightweight nature contributes to reduced overall assembly weight without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Insert the M10 x 39mm Hex Head Cap Screw into the pre-drilled hole or mating component. 3. Tighten the screw using an appropriate M10 hex tool (e.g., socket or wrench) to the recommended torque specification for polycarbonate, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to thread stripping or cracking of the screw head. | Utilize a torque wrench and adhere to the manufacturer's recommended torque values for polycarbonate fasteners, generally lower than for metal screws. |
| Using the screw in applications exceeding its temperature or load-bearing limitations. | Consult the material datasheets for polycarbonate to confirm its suitability for the operating temperature range and the anticipated mechanical loads of the application. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical Enclosures and Assemblies, Marine and Coastal Environments, Food Processing Equipment, Corrosive Chemical Handling Systems, Lightweight Structural Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||