This M10 x 37mm brass hex head cap screw offers excellent corrosion resistance. Featuring a robust 31mm head width for secure torque application, it's engineered for demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 37mm |
| Head Width | 31mm |
Manufactured under strict quality controls, this M10 x 37mm hex head cap screw is precision-machined from high-grade brass, ensuring superior corrosion resistance and non-magnetic properties. The 31mm head width facilitates easy gripping and tightening with standard tools, providing reliable mechanical fastening. Brass's inherent ductility and machinability allow for tight tolerances, making it suitable for applications where galling is a concern or where aesthetic appeal is important. Its excellent electrical conductivity also makes it a preferred choice in electrical and electronic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket for the 31mm hex head. 2. Thread the M10 x 37mm screw into the pre-tapped hole or nut, ensuring a smooth engagement. 3. Tighten the screw to the required torque specification, avoiding over-tightening to prevent damage to the brass material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force when tightening, leading to thread stripping or head deformation. | Apply torque gradually and refer to recommended torque charts for brass fasteners of this size. |
| Using the wrong tool size, which can damage the hex head and prevent proper tightening. | Ensure the tool precisely fits the 31mm head width for optimal engagement and torque transfer. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Electrical and electronic assemblies, Marine hardware and fittings, Decorative and architectural fixtures, Corrosion-sensitive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||