Engineered from high-performance polycarbonate, these M10 x 35mm hex head cap screws provide excellent chemical resistance and non-conductive properties. Their robust design ensures reliable fastening in diverse industrial applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Size | M10 |
| Length | 35mm |
| Head Width | 16mm |
Precision-manufactured to tight tolerances, these M10 x 35mm polycarbonate hex head cap screws feature a nominal thread diameter of 10mm and a total length of 35mm. The head boasts a width of 16mm, providing ample surface area for secure tightening with standard M10 tooling. Polycarbonate offers a unique combination of high impact strength, excellent dimensional stability, and superior resistance to a broad spectrum of chemicals, acids, and alkalis, making it suitable for environments where corrosion or electrical conductivity is a concern. Its inherent insulating properties also make it a safe choice for electrical assemblies and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate M10 tooling (e.g., socket wrench, hex key). 2. Ensure mating threads are clean and free of debris. 3. Insert screw and tighten gradually to the desired torque, avoiding overtightening to prevent damage to the polycarbonate threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening | Apply torque gradually and stop once snug. Consult torque specifications if available for the mating material. |
| Using metallic tools that can scratch or damage the polycarbonate surface | Utilize tools designed for plastic fasteners or ensure metallic tools have protective coatings. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and components, Chemical processing equipment, Medical devices, Corrosion-prone environments, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||