This M10 x 133mm Hex Head Cap Screw, constructed from robust Polycarbonate, offers exceptional strength and corrosion resistance. Its dielectric properties make it ideal for sensitive environments, ensuring reliable fastening.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Size | M10 |
| Length | 133mm |
| Head Width | 31mm |
A proven choice for industrial professionals, this M10 x 133mm Polycarbonate Hex Head Cap Screw is engineered for superior performance. Featuring a substantial 31mm head width for enhanced torque distribution, the engineered polycarbonate material provides excellent tensile strength and impact resistance, while remaining inherently non-conductive and resistant to a wide range of chemicals and environmental factors. This makes it a critical component for applications requiring both mechanical integrity and electrical insulation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Thread the M10 Hex Head Cap Screw into the designated threaded hole or nut. 3. Tighten to the specified torque value using an appropriate wrench or socket, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M10 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M10 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening leading to thread stripping or head cracking. | Utilize a calibrated torque wrench and adhere to recommended torque specifications for polycarbonate fasteners. |
| Using in environments exceeding the material's temperature or chemical resistance limits. | Verify the operating environment's temperature and chemical compatibility with polycarbonate before installation. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and control panels, Corrosive chemical processing equipment, Marine and offshore applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||